Hi,I'm so-o-o confused!!! I wanted to install 3 lever handle tub and shower faucets. I found the trim kit for the
Single handle on/off volume control. ( American Standard #555.700.002)It said that the rough in valve for this
Is AS R701. I thought,buy two and I will have hot and cold sorted out.All I needed now was the middle handle
For some kind of diverter or transfer of water to the shower head and to the tub spout. I then found an AS
Diverter trim kit( #555.430.002) with the rough in valve AS (#R420).At this point I thought I was doing really
Well. NOT!!! I took a look at the pictures of the rough in valve( R420) and only saw two holes.What's going on
I thought to myself.I need 4 hole openings.1 for hot,1for cold,1for the shower and 1for the spout.
After a 45 min. call to AS I was told that what I wanted to do couldn't be done because they no longer make
3 handle tub and shower faucets in the style that I wanted.( AS Town Square) She said why don't I make life
Simple and just buy AS Town Square bath and shower trim kit ( 555.522.002) and the accompanied AS rough
In valve ( r120).I noticed that the r120 had 4 holes and asked couldn't I use that as the diverter or transfer
Valve? NO!!! I figured I was stuck with a single lever all controlling unit.
I just can't believe that it can't be done using the Town Square style that I want.Just for further info.the AS
Shower head is (#8888.077.002) and the spout with diverter knob on it is (#8888.088.002) and without is
( #8888.089.002).The pipes in my house 1/2 ".Can anybody help?I simply prefer the look of 3 handles.
Single handle on/off volume control. ( American Standard #555.700.002)It said that the rough in valve for this
Is AS R701. I thought,buy two and I will have hot and cold sorted out.All I needed now was the middle handle
For some kind of diverter or transfer of water to the shower head and to the tub spout. I then found an AS
Diverter trim kit( #555.430.002) with the rough in valve AS (#R420).At this point I thought I was doing really
Well. NOT!!! I took a look at the pictures of the rough in valve( R420) and only saw two holes.What's going on
I thought to myself.I need 4 hole openings.1 for hot,1for cold,1for the shower and 1for the spout.
After a 45 min. call to AS I was told that what I wanted to do couldn't be done because they no longer make
3 handle tub and shower faucets in the style that I wanted.( AS Town Square) She said why don't I make life
Simple and just buy AS Town Square bath and shower trim kit ( 555.522.002) and the accompanied AS rough
In valve ( r120).I noticed that the r120 had 4 holes and asked couldn't I use that as the diverter or transfer
Valve? NO!!! I figured I was stuck with a single lever all controlling unit.
I just can't believe that it can't be done using the Town Square style that I want.Just for further info.the AS
Shower head is (#8888.077.002) and the spout with diverter knob on it is (#8888.088.002) and without is
( #8888.089.002).The pipes in my house 1/2 ".Can anybody help?I simply prefer the look of 3 handles.
Last edited by a moderator: