Richard Mincher
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
I have a sink/disposal connected as per Terry's diagram: https://terrylove.com/images/sink_dw.jpg
The "T" where the disposal meets the vertical line running into the trap clogs easily during high use times (like today, Thanksgiving). The problem is that ground food gets wedged in the down-pointing "baffle" in the T; I assume that this is a special T for disposals (with the baffle) to pursuade food not to back up in the ajoining sink.
It's all 1 1/2". Is there any harm replacing that T with a normal non-baffled T?
Thanks,
Dick Mincher
Cupertino, CA
The "T" where the disposal meets the vertical line running into the trap clogs easily during high use times (like today, Thanksgiving). The problem is that ground food gets wedged in the down-pointing "baffle" in the T; I assume that this is a special T for disposals (with the baffle) to pursuade food not to back up in the ajoining sink.
It's all 1 1/2". Is there any harm replacing that T with a normal non-baffled T?
Thanks,
Dick Mincher
Cupertino, CA