(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Fleck 7000 FAILURE

  1. #1
    DIY Junior Member Acropora's Avatar
    Join Date
    Apr 2013
    Location
    Michigan
    Posts
    5

    Thumbs down Fleck 7000 FAILURE

    This thing didn't have power going to it for a few of days. On plugging it back in the cam spins round and round constantly taking about a minute to go thru all the cycles. Display shows UD synch. Vendor is of no help. Called pentair water tech support. They recommend compressing the gears top to bottom by hand to be sure all is well, being sure the circuit board is in correctly, and using a paper clip to short a capacitor on the board while unplugged. Doing that then pressing regen while plugging unit in for a hard restart doesn't work. Is this unit in need of replacement or is there anything else to try? Thanks

  2. #2
    Aspiring Old Fart, EE, computer & networking geek Mikey's Avatar
    Join Date
    Nov 2005
    Location
    Central Florida
    Posts
    2,685

    Default

    Was there any outside event (e.g., lightning) that might have affected it?

  3. #3
    DIY Junior Member Acropora's Avatar
    Join Date
    Apr 2013
    Location
    Michigan
    Posts
    5

    Default

    Quote Originally Posted by Mikey View Post
    Was there any outside event (e.g., lightning) that might have affected it?
    Nope, it just wasn't making a good connection with the outlet, that's all. Thanks

Similar Threads

  1. At wits end with new Fleck 7000 stx!
    By Adamk in forum Water Softener Forum, problems, installation and reviews
    Replies: 8
    Last Post: 01-22-2013, 11:11 AM
  2. New fleck 7000 sxt questions
    By Steve424 in forum Water Softener Forum, problems, installation and reviews
    Replies: 14
    Last Post: 12-04-2012, 01:31 PM
  3. Fleck 7000 questions
    By cgarai in forum Water Softener Forum, problems, installation and reviews
    Replies: 9
    Last Post: 11-16-2012, 12:47 AM
  4. Fleck 7000 Problem
    By ArayT in forum Water Softener Forum, problems, installation and reviews
    Replies: 2
    Last Post: 02-03-2011, 11:04 PM
  5. Help Programming a Fleck 7000 SXT
    By batboy in forum Water Softener Forum, problems, installation and reviews
    Replies: 36
    Last Post: 09-03-2010, 06:43 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •