Broken pitles
- Thread starter Zermac
- Start date
Users who are viewing this thread
If you got the pitless off and out of the way, and you can still see the drop pipe, you can put a loop over the pipe with a nylon strap and pull on that. I just wonder if your pump is stuck, which is the reason the pitless broke?
Sponsor
Paid Advertisement
Craigpump
In the Trades
Or it is a piece of sch 21 or 40 pvc and the adapter broke off.
You can make a tool from a piece of steel pipe & some long bolts welded on at an angle to see if you can snag the wire and then pull the pump.
You can make a tool from a piece of steel pipe & some long bolts welded on at an angle to see if you can snag the wire and then pull the pump.
Similar threads
