(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Motion detector wiring

  1. #1
    DIY Junior Member Talisker's Avatar
    Join Date
    Feb 2013
    Location
    Texas
    Posts
    20

    Default Motion detector wiring

    In a one story home, if I want to install motion detector in couple of room, how hard is it? Also I am planning to add some undercabinet light and I would like to add additional outlet? is it possible, if so can some please let me know the process to pre-wire for motion detector and adding outlets.

  2. #2
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    You can buy a motion dectector which installs in place of a plain light switch. Make sure to read up and understand the subtle difference between occupancy sensor and vacancy sensor. Also, make sure that the detector you purchase is compatible with the lights which will be in the room....i.e. CFL, tube fluorescent, LED, etc....because some are and some are NOT>

  3. #3
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,382

    Default

    That is such an open ended question that it's hard to give any definitive response! It's almost like asking how do I fix my car without saying what the symptoms are or what kind it is...

    Yes, all of those things you mentioned are possible. Whether it will be easy or hard just depends. Whether you can do it without tearing up the walls and ceiling depends on your skill level, tools available, and what's there now. The undercabinet lighting complexity would depend on whether the things are line voltage, low voltage, and whether you want a separate switch (or use a built-in one) or if you want to be able to dim them. So many choices, very different products and install requirements.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,615

    Default

    THEre is no way we would attempt to TEACH you basic wiring over the Internet with a couple of E-mails or postings.
    Licensed residential and commercial plumber

Similar Threads

  1. Adding a motion detector to 2 garage carriage lights
    By rockycmt in forum Electrical Forum discussion & Blog
    Replies: 3
    Last Post: 10-29-2009, 06:57 PM
  2. Wiring issue with motion detector
    By mntentman in forum Electrical Forum discussion & Blog
    Replies: 21
    Last Post: 09-22-2008, 03:51 PM
  3. Connecting Motion Activated to Non Motion activated Flood Light
    By zapped in forum Electrical Forum discussion & Blog
    Replies: 7
    Last Post: 11-30-2007, 07:20 AM
  4. faucet motion sensors
    By fauxman in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 3
    Last Post: 03-05-2007, 04:33 PM
  5. motion sensor shut-off
    By gradog in forum Pumps and Tanks Well Forum & Blog
    Replies: 12
    Last Post: 11-11-2006, 03:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •