(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 1 of 1

Thread: Tropical DIY thermosyphon solar water rig

  1. #1
    DIY Junior Member
    Join Date
    Feb 2013
    Location
    Bahamas
    Posts
    2

    Default Tropical DIY thermosyphon solar water rig

    I'm building a house on an island in the Bahamas and last month my propane instahot developed an internal gas leak. I sent it back to the US for replacement and the small airline lost it, refusing to pay for its replacement. So. When my DH came for a visit, he threw together a slapdash sun shower for me. About 200 feet of 3/4" soft copper, painted black, affixed to a tarpaper covered sheet of 4x8 ply IN A RACETRACK CONFIGURATION, plumbed inline to our pressurized cistern system. I threw a sheet polyiso under it for giggles. As the sun drops in the afternoon, I toss another sheet on top so I have some tepid water in the evening. Obviously, this is temporary until we decide on what we want as a permanent solution. Now that the propane instahot has disappeared and won't be replaced gratis, we don't think we want another. We have purchased a cycle stop valve to deal with the vagaries of our cistern/pump/accumulator tank configuration but still feel that the instahot's performance was less than satisfactory for a variety of reasons. So my question is can/how to adapt my racetrack of copper tube into a thermosyphon system. I'm hoping that I can mount a 20 gallon electric water heater pressurized inline, above the collector, and utilize that as our storage tank and backup, also giving me pressure relief valvage. Will this work? Will the racetrack pipe configuration siphon? MUST the cold water inflow be at the very bottom of the collector and the output be at the very top? It's Feb now and I already get water that's teakettle hot. Ain't no freeze problems HERE ladies! Bottom line is that I am close to the salt water and I've spent enough time here to know that simple is best so I would like to avoid a pump and controller. And, of course, the simplest of parts are impossible to get here. A roof mount was the original plan but I like this new direction and think it may be better for hurricane season as well . And yes, the collector will get framed and glazed with polycarbonate. Many thanks for any input and advice. Or even guffaws of incredulity.....
    Last edited by Dalrock; 02-21-2013 at 07:21 PM.

Similar Threads

  1. Photovoltaic to heat water vs solar water heater
    By rains808 in forum Solar and Geothermal Water Heating Forum
    Replies: 16
    Last Post: 05-11-2012, 02:09 PM
  2. NEW SOLAR WATER PUMP for DRINKING WATER & IRRIGATION in RURAL AREAS
    By newsolarpump in forum Pumps and Tanks Well Forum & Blog
    Replies: 3
    Last Post: 11-21-2011, 11:15 AM
  3. Is there a maximum height for a Thermosyphon hot water system to work ?
    By TheycallMeDave in forum Solar and Geothermal Water Heating Forum
    Replies: 3
    Last Post: 07-15-2011, 11:55 AM
  4. Solar Hot water
    By Bill Arden in forum Solar and Geothermal Water Heating Forum
    Replies: 13
    Last Post: 07-15-2009, 05:39 PM
  5. Solar Hot water
    By Bill Arden in forum HVAC Heating & Cooling
    Replies: 2
    Last Post: 07-28-2008, 08:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •