Moving out to the country and the place has well water. I need to replace the system as it is worn out-12 years old and doesn't work well. These are the values as reported to me.
PH 6.0
Mag/Cal 3-4 grains(?)
Iron 2.5 PPM
solids(?) 91 PPM
What is required to correct this water problem?
Which system is the best ?
Any advise from the "water gurus"
Kirkridge
PH 6.0
Mag/Cal 3-4 grains(?)
Iron 2.5 PPM
solids(?) 91 PPM
What is required to correct this water problem?
Which system is the best ?
Any advise from the "water gurus"
Kirkridge