washer, shower, sink tie in & a bunch of mystery pipe

Users who are viewing this thread

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
hey guys hope this works
so tore out old roman tub arm was buried in footing 1 1/2 too small so i want to change to 2...... whoa big mistake
any ways as u can see i have opened a can o worms
i will be cutting out footing & repair with sleeved pipe all 2" if posible and would like to get that water out of footing
also need center on new shower drain and i got ..... something in the way
also seeing how its all getting chopped i want to put washer setup in stud bay as well with a nice box
one catch if you see how it is set now im putting in a resessed med cab right above or at the y in vent where it meets and opening up the 3 stud bay by 1 1/2' yup 1 stud running on side
this is my moms house so im down for the project
im very slow so shes willing to pay me
im a 4th gen tile contractor who has moved into full bath remodel so im not a total plumb rook but just in thr bath n tile relatedplumb
 

Attachments

  • DSC01816.jpg
    DSC01816.jpg
    43.7 KB · Views: 454
  • DSC01820.jpg
    DSC01820.jpg
    27.1 KB · Views: 469
  • IMG_1895.jpg
    IMG_1895.jpg
    50.1 KB · Views: 448
  • IMG_1900.jpg
    IMG_1900.jpg
    67.7 KB · Views: 472
  • IMG_1909.jpg
    IMG_1909.jpg
    52.4 KB · Views: 471

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
more pictures
 

Attachments

  • IMG_1914.jpg
    IMG_1914.jpg
    52.2 KB · Views: 455
  • IMG_1938.jpg
    IMG_1938.jpg
    62.2 KB · Views: 445
  • IMG_1949.jpg
    IMG_1949.jpg
    73.5 KB · Views: 443
  • IMG_1944.jpg
    IMG_1944.jpg
    90.4 KB · Views: 432
  • IMG_1940.jpg
    IMG_1940.jpg
    55.9 KB · Views: 444

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
ground lines
 

Attachments

  • IMG_1966.jpg
    IMG_1966.jpg
    67.2 KB · Views: 435
  • IMG_1967.jpg
    IMG_1967.jpg
    67.4 KB · Views: 452
  • IMG_1968.jpg
    IMG_1968.jpg
    50.9 KB · Views: 458
  • IMG_1969.jpg
    IMG_1969.jpg
    56.4 KB · Views: 457

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
IMG_1926.jpgIMG_1931.jpg
so you see washer drains under sink but picks up vent on tub
so what do you guys think ? i have some drawings of how i plan to do but any advice would be nice , if need be i don mind adding 2x4 to make wall bit thicker to run pipe
& no it has not had problem & this is guest bath
she wants low curb so i gotta get that trap right into those lines in ground
 

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
so ill start w the cast iron waste under slab,
where would you cut? the piece that is horzontal & ties into y looks almost scary to cut or tie into its so rusted
was thinking keeping it & puting a long sweep t to branch to new shower, vent comes up same as is
on right want to no hub to the vert pipe above 22.5 run up put long sweep or sani t straight to trap for washer stand pipe & 45 it back to center above where i want to tie in all the vent line
above the arm for washer would be sink stub out and reverse side a clean out
then a y above to tie into shower vent, run vent little on 45 to left out of medicine cab way then up , back 45 to vent above
copper in that bay will be tight but fine
my only prob is getting it out of ground
& how can i identify some of the others?
like the 1" possible green copper on the right side of drain stack?
or the other cast... or str8 iron that runs next toshower drain and left of that some 1 or rotten odd size guy
then what apper to be 3/4 line & 1/2" through the area for new shower drain
So I just saw that that the left wall in bath is side dog run that has a couple hose bib and water heater in middle , but I'm pretty sure all gas is ran above ,it is every where else here
 

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
so here are some plans & more pics , gonna be hard branching off to make new shower drain when i have all this in the way....
 

Attachments

  • wall plumb plan.jpg
    wall plumb plan.jpg
    30.6 KB · Views: 401
  • photo (2).jpg
    photo (2).jpg
    46.2 KB · Views: 420

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
going to be hard turn for shower , all that crao right in line w my new drain
n e one have idea ? that 2' pipe is for?
 

Attachments

  • photo (1).jpg
    photo (1).jpg
    67.5 KB · Views: 435
  • photo (4).jpg
    photo (4).jpg
    74.3 KB · Views: 423
  • photo (5).jpg
    photo (5).jpg
    72.5 KB · Views: 412

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
wow so this is the can of worms.....
& i be the dumbass who opened it
turns out ? pipe was a completly rotton main line from main to service panel scary
a bunch of other oddity and rusted out lines as well
 

Tileman4

In the Trades
Messages
36
Reaction score
0
Points
0
Location
So California
so i posted in remodel area too but seems like all the top dogs r here so i thought id give a shot
again i apologize for any rude comments i made i was asking for someone else to do my job & that dont fly
this is just a temp stubout & setup so washer can be used but i need to start to bury mystuff for concrte
also pan will be recessed to alow for 1 2x4 or 1x1 for curb & maintain 4" from drain to curb top, almost a walk-in but not quite
need to clear all that stuff at drain but without adding 12+ joints underslab im kinda f-ed i can make that work just need some feed back on drains
all unit will have own vent 2" to the lid
 

Attachments

  • tn.jpg
    tn.jpg
    4.7 KB · Views: 370
  • tn-2.jpg
    tn-2.jpg
    4.2 KB · Views: 374
  • tn-1.jpg
    tn-1.jpg
    4.2 KB · Views: 420
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks