(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 6 of 6

Thread: removing goulds impeller

  1. #1
    DIY Junior Member poormansdvd's Avatar
    Join Date
    Jan 2013
    Location
    NY
    Posts
    3

    Default removing goulds impeller

    how do i hold the shaft to remove impeller
    Name:  pump.jpg
Views: 397
Size:  52.9 KB

    heard that it was on this site but i cannt find it

  2. #2
    Moderator valveman's Avatar
    Join Date
    Mar 2006
    Location
    Lubbock, Texas
    Posts
    4,154

    Default

    The impeller is already off. All that is left is the mechanical seal.

  3. #3
    DIY Junior Member poormansdvd's Avatar
    Join Date
    Jan 2013
    Location
    NY
    Posts
    3

    Default

    i need to know to to remove my mine that is just a picture of a pump like mine?

  4. #4
    Moderator valveman's Avatar
    Join Date
    Mar 2006
    Location
    Lubbock, Texas
    Posts
    4,154

    Default

    If you can't get a wrench on the shaft between the pump and motor, then you can remove the end of the motor, and there should be some flats on that end of the shaft to get a cresent on.

  5. #5
    DIYer, not in the trades LLigetfa's Avatar
    Join Date
    Feb 2011
    Location
    NW Ontario, Canada
    Posts
    3,675

    Default

    Goulds has a service manual on their site. On page 68, it says:

    9. A.O. Smith Motors – Remove motor end
    cover. Insert 7⁄16" open end wrench under
    switch mechanism or behind overload
    protector onto flats on motor shaft.
    While holding the shaft against rotating,
    turn the impeller counterclockwise. The
    impeller should turn completely off the
    shaft in this manner.

  6. #6
    DIY Junior Member poormansdvd's Avatar
    Join Date
    Jan 2013
    Location
    NY
    Posts
    3

    Default

    THANKS LLigetfa YOU THE BOMB

Similar Threads

  1. Need Help Removing Impeller from Goulds JS+ pump
    By Pinckman in forum Irrigation / Sprinkler Forum
    Replies: 1
    Last Post: 02-06-2010, 02:19 PM
  2. impeller on goulds j7s
    By spark in forum Pumps and Tanks Well Forum & Blog
    Replies: 1
    Last Post: 09-08-2009, 10:22 AM
  3. Help removing goulds J5 pump impeller.
    By joe_farmer in forum Pumps and Tanks Well Forum & Blog
    Replies: 2
    Last Post: 04-20-2009, 07:02 AM
  4. Water Ace R10L Impeller
    By grerey2003 in forum Irrigation / Sprinkler Forum
    Replies: 4
    Last Post: 02-23-2009, 05:20 AM
  5. Air in impeller? From where?
    By MaxBlack in forum Pumps and Tanks Well Forum & Blog
    Replies: 8
    Last Post: 02-24-2007, 08:07 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •