Sizing on fleck 5600 softener

Users who are viewing this thread

Dwdesign

New Member
Messages
1
Reaction score
0
Points
0
Location
Hawthorne, fl
I am replacing my waterboss big boss and thinking to get a fleck 5600. There are 2 people in our house and our water tests 11 hardness, iron is 1.5, ph 7 . I have 3/4 pipe going into and out of the waterboss with quick disconnect hose . I need to know sizing recommendations and where would be the best web seller to purchase from. I'm going to try to do the install myself so I will probably need support from the seller.
 

ditttohead

Water systems designer, R&D
Messages
6,088
Reaction score
455
Points
83
Location
Ontario California
Sounds like you are on the right track. I would recommend regular cleaning of the resin if you are not going to remove the iron before the softener. PM sent.
 

Mialynette2003

In the Trades
Messages
944
Reaction score
17
Points
18
Location
Ocala, Florida
From what you posted, a 1 CF softener should take care of your needs. If you have body sprayers or several bathrooms, you may need a bigger system.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks