(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: tank pressure

  1. #1
    DIY Junior Member penrosepete's Avatar
    Join Date
    Jun 2013
    Location
    penrose, Co.
    Posts
    6

    Default tank pressure

    how much pressure should I have in my drained tank and pump off? It don,t take much but I am confused

  2. #2
    DIY Senior Member craigpump's Avatar
    Join Date
    Apr 2012
    Location
    ct
    Posts
    712

    Default

    The precharge should be 2 psi below cut in. On a 40/60 you should have a 38 psi precharge.

  3. #3
    DIYer, not in the trades LLigetfa's Avatar
    Join Date
    Feb 2011
    Location
    NW Ontario, Canada
    Posts
    3,680

    Default

    On a jet pump system I would go 5 PSI below cut-in.

  4. #4
    DIY Junior Member penrosepete's Avatar
    Join Date
    Jun 2013
    Location
    penrose, Co.
    Posts
    6

    Default

    Thank you, Thank you

Similar Threads

  1. New pump & storage tank & pressure tank problem...
    By robert- in forum Pumps and Tanks Well Forum & Blog
    Replies: 3
    Last Post: 06-25-2013, 08:24 PM
  2. Water hammer bouncing pressure gauge needle AFTER pressure tank fills
    By hawkhunter in forum Pumps and Tanks Well Forum & Blog
    Replies: 10
    Last Post: 10-27-2012, 10:35 AM
  3. why is a pressure tank with a bladder better than plain old steel pressure tank
    By fcbclan in forum Pumps and Tanks Well Forum & Blog
    Replies: 12
    Last Post: 03-26-2012, 02:56 PM
  4. Convert propane tank to water pressure tank
    By jhv in forum Irrigation / Sprinkler Forum
    Replies: 5
    Last Post: 06-27-2008, 08:23 PM
  5. Bladder pressure tank vs standard pressure tank
    By brown13 in forum Pumps and Tanks Well Forum & Blog
    Replies: 8
    Last Post: 06-06-2006, 07:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •