(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Installing new water treatment system

Hybrid View

  1. #1
    DIY Junior Member tdriver's Avatar
    Join Date
    Jan 2013
    Location
    Fruitland, NM
    Posts
    2

    Default Installing new water treatment system

    I live in NW New Mexico and am on Farmington city water. It is rather hard at 18 grains and dishes have a film all the time. Other water areas of the house have residue left behind. I would like to install a softening system.

    I looked into all types including salt and non-salt types. There is one that has a magnet that clamps to the piping system. These all have carbon filter systems to remove chlorine and other chemical contaminates, which I think we need also. We are also on a septic system. Are we best off going with non salt softening and filtration or salt softening and have only the kitchen sink with RO system for drinking? What systems are getting the best ratings for cost and effectiveness?

    Thanks, Tim

  2. #2
    Water systems designer, R&D ditttohead's Avatar
    Join Date
    Jan 2012
    Location
    California
    Posts
    1,707
    Blog Entries
    1

    Default

    I manufacture and distribute many non salt based technologies, including anti-scale, electronic, magnetic etc. They have their place and application, but... almost everybody who works in this industry has a salt based system at their own house. Do not believe the "testimonials" of the non salt based systems. We manufacture a lot of these for other companies branded under their own name, and the customer satisfation rate is wildly different from the salt based systems.

    The only time I recommend a non salt based softener is when the person is unable to maintain the salt (age or disability is the most common reason), or if they are in a brine restricted area or municipality, or if the person hates soft water and they will not be convinced otherwise.

    Your water report shows some copper in the water which tends to quickly foul most anti-scale medias, it also contains lead. The water quality report does not go into detail about TDS, Hardness, competing ions etc that I would normally like to see to properly design a water treatment system. Your water contains over 1 ppm chlorine, I would recommend that be removed, but that is up to you.

    What size is your plumbing? How many people in the house? How many bathrooms? Any unusually high water using devices? (mega shower..)

    And... definetly an RO for drinking water at your sink.

  3. #3
    DIY Senior Member lifespeed's Avatar
    Join Date
    Apr 2007
    Location
    California
    Posts
    319

    Default

    Backwashing carbon filter, salt softener and RO are the best together.
    Lifespeed

Similar Threads

  1. Please help to identify a water treatment system (w photos)
    By fleur in forum Water Softener Forum, problems, installation and reviews
    Replies: 8
    Last Post: 09-15-2011, 09:50 PM
  2. need advice on water treatment system
    By bronzemaxell in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 9
    Last Post: 07-16-2010, 09:52 AM
  3. Water Treatment System
    By Truckman in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 13
    Last Post: 04-09-2008, 06:51 PM
  4. Need to stop sprinkler system from siphoning from water treatment
    By sp00kster in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 33
    Last Post: 04-10-2006, 04:49 PM
  5. Chlorine water treatment system
    By Alexdc99 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 3
    Last Post: 02-28-2006, 02:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •