MonkeyWrenchHead
New Member
Is it common to install shut off valves in a residential plumbing setup between pex tubing without a support of some sort, or is it a better practice to try to install the valves onto a joist?
I'm planning to use the standard pex clamp supports for the tubing, but am trying to decide how I lay it out, and if the valves should land on a joist (Either on the bottom or side) to support the valve, or if that isn't necessary.
I'm planning to use the standard pex clamp supports for the tubing, but am trying to decide how I lay it out, and if the valves should land on a joist (Either on the bottom or side) to support the valve, or if that isn't necessary.