Terry Loves Bellevue & Kirkland
425-649-5683, Top Rated Plumber 1-877-808-5683
Results 1 to 15 of 21

Thread: HELP! Underwater and over my head. Supply main leak

Hybrid View

  1. #1
    DIY Member nursedoe's Avatar
    Join Date
    Jul 2007
    Location
    California High Desert
    Posts
    91

    Exclamation HELP! Underwater and over my head. Supply main leak

    I nearly cried when I opened the 789.87 dollar water bill! A huge water leak and we didn't notice. Called a friend, who remembered stepping in a muddy place at the far end of the patio a couple weeks earlier and he assumed someone had left a water hose on too long. So, in the past two days, we have received estimates from plumbers and handymen from 2500 to 8,000 to find the leak that appears to be under the fairly new concrete patio ( 20x 65 feet). Some say the patio has to be dug up and replaced. Some will try with a water thing that digs holes and one guy said..um just move where the main comes into the house and avoid the house concrete expense.

    You guys helped me a couple of years ago do a bathroom remodel. And it turned out great. This time, it is an emergency and I don't have that much money to fix the darn leak. I have 3 days off and a shovel. I will spend a good part of the evening trying to research what will be involved in each of the options that my mother fielded.

    The basics: I live on 1.52 acres in the High Desert which is earthquake country. The meter is about 200-300 feet from my house. The house was built in the mid 1950's so I know I will need to replace a good deal of pipe. Most of plumbers said it was best to replace the pipe all the way to the meter to avoid having to dig it up again. I am in shock at the prices. I would LOVE to pay someone to do this job, but I honestly don't have that much money.

    There is even opinions on plastic and copper. I know copper is more expensive, but I do know that I have had so many leaks with PVC pipes ( sprinklers). I am not sure about the chemicals leaching in from plastic. I won't know until tomorrow what type of pipe is there now. All this happened while I was at work and I don't get home until after dark so I haven't seen the damage.

    I am pretty handy and made it through the bathroom remodel with your help before. For right now, we drive out to the meter and turn the water on for an hour to shower and wash dishes in the morning and leave it off the rest of the time. Not going to be able to keep this up for long.

    Where do I start? Move the whole main supply over to avoid the patio drama? Copper Tubing? Plastic? If the leak is really under the patio, why do I have to turn the water off at the meter instead of at the pressure box right before the patio?

    I promise to spend time learning the vocabulary tonight. I can take pictures if it helps.

    Thanks so much

  2. #2
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    6,841

    Default

    You obviously have a serious problem. I'm not a pro, and I won't even venture a guess at what you should do other than to explore all of the options, including finding and repairing the leak. If it is under the concrete patio, remember that concrete can be cut and repaired so the entire slab would not have to be removed. This being the start of the week-end, many of the plumber pros that frequent the forum may not see this post until next week, so keep checking back. I'm sure you will get some valuable pointers and suggestions from them. But you should know that the PVC that would be used for replacing the whole main line should that be required, comes in long rolls and is not the ridged kind of PVC in your lawn sprinkler system.

  3. #3
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    19,222

    Default

    HOw tough is digging there? You may be able to rent a trencher or a mini bobcat. You'd need to know how deep the pipe must be buried, this is either below the frost line, or something like 18", whichever is deeper. You need to know your local code for that. One continuous piece from a roll would be best; then you only have a connection at the meter and at the house. Many utilities use plastic pipe. The soil and water combination in some places makes copper a very bad choice. SOft rolled copper that long and big would be quite expensive. Sticks of it would require brazing, as soldering isn't allowed underground, and there would be a joint at least every 20', about the longest you can buy sticks (10' is more commonly available). Before you start digging, you should call DIgSafe, or the equivalent in your area (might be tough on the weekend, but maybe not). You need to know where buried utilities are so you don't sever or damage them in the process.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer

  4. #4
    DIY Member nursedoe's Avatar
    Join Date
    Jul 2007
    Location
    California High Desert
    Posts
    91

    Default

    My gas line comes from the front of the house. My electricity is overhead. So I just have the water supply and the two septic tanks. Digging should be more frustrating than difficult. My yard is mostly soft sand like a beach. Some areas with harder dirt. So in some places digging is like trying to dig a hole in water. It just fills in with sand as you dig it out. So, here I go trying to figure it out. Oh, how I wish older homes came with a user manual.

    Update: There is a box in the middle of the patio about 6 feet from the house with a turn off and on station. Then I see a huge hole at the end of the patio in line with this box where they dug down to expose a thick mud covered pipe. I guess this means I will have to go way out to the alley to turn the water off and on at meter until we figure this out. I am trying to remember that folks have hauled water for thousands of years. I plan to fill up about 5 tamale cooking pots with water after my shower so we have water to cook and clean with the rest of the day ( and flush the toilets!)

    Update again: Measure about 300 feet from the house to the meter. The leak seems to be somewhere between the edge of the patio and that box thing. Which is about 12 feet or so. Oh, even with wonder woman strength, I don't think I could dig that trench in a week. I need one of those Huge gophers that likes to dig under my above ground pool to help me tunnel. In the hour or so the water was on, it filled that box and the 4x4 x 3 feet hole they dug in front of the patio looking for the leak. Looks like we need to shower at the neighbors house. That is a LOT of water!
    Last edited by nursedoe; 01-12-2013 at 12:14 PM.

  5. #5
    Moderator and Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,003

    Default

    At 300 feet from the meter, 1" is probably too small. K copper will cost you an arm and a leg. I would definitely recommend 1 1/4" polyethylene ( PE ) tubing. Very reasonable price, easy to work with. You do need to get "dig alert" in before you start digging trenches. No need to make things worse!!

    Without actually seeing your layout, all new from the street may be the best idea, and in that case consider finding a different route. If an extra 25 to 50' of pipe would avoid jacking up the new slab, then consider that for sure.

  6. #6
    DIY Member nursedoe's Avatar
    Join Date
    Jul 2007
    Location
    California High Desert
    Posts
    91

    Default

    Thanks, Jimbo. I am going to take some pictures in a little while. I was waiting for the water to drain from the big hole so I can see the pipe better. I do remember that a few years ago, when the kids hit that black pipe we searched high and low for a joint of some kind and NO one had the right size. Plumbers came out saying they didn't know that size etc and a minimum of 450 to fix the 1 foot section of pipe. Water company came out while plumber was explaining the 450 charge, he jumped in the hole, attached a joint of some sort in less than 10 seconds and I swear he raised his hand like a calf roper as the pipe snapped back in place. No charge. So it is some strange pipe and pretty big and No one will be able to fix it because of the strange size if it is the same stuff from the previous leak about 100 feet closer to the meter.

    Can I put a mix of copper and plastic? I am wondering about doing just 60 feet of copper closest to the house because of the tree roots. The house was built in the mid 1950s and I often have problems with the pipes that drain to the septic ( I have two septic tanks!)...So If I have to dig up the darn patio, I will want to replace those at the same time! I should have some pictures and drawings by end of the day. Thank you so much for any advice.

    The dig alert confuses me. There is only the water supply in the back. The gas comes from the front and electricity from above. I am going to find the maps of the septic tanks and once and for all mark them with something I can always find without digging
    with that water digger

  7. #7
    DIY Member nursedoe's Avatar
    Join Date
    Jul 2007
    Location
    California High Desert
    Posts
    91

    Default

    I didn't know that the plastic stuff came in rolls. I was pricing the rolls of K type copper tubing- 1 inch and it is pretty spendy for 200 feet. I am leaning toward copper so far because many of the problems here are caused by tree roots. There is a huge and beautiful tree fairly close to the house. I want to keep my plumbing destroying trees because I live in the desert and they provide much needed shade for the house and above ground pool. I have used copper sprinkles in the pipes to kill tree roots so I am wondering if I copper supply line would keep the roots away. There is a strange pipe material that leads from the meter to the house. I had a leak years ago and uncovered this thick black plastic pipe and we could not find any fittings for it. The water company came out and said it was their pipe and they did not know how I ever got that on my private property. So, I imagine it is that stuff. Will let you know once I get warm enough to go out there and start digging.

Similar Threads

  1. Screw head in hot water supply ??
    By kstuart in forum Plumbing Forum Discussion & Blog
    Replies: 4
    Last Post: 10-13-2011, 10:20 AM
  2. Make a DIY underwater canister dive light for scuba diving
    By imigyjunia in forum Electrical Forum discussion & Blog
    Replies: 0
    Last Post: 07-07-2011, 12:45 AM
  3. Underwater supply pipe?
    By Guest in forum Pumps and Tanks Well Forum & Blog
    Replies: 9
    Last Post: 01-19-2010, 10:18 AM
  4. Foot Valve leak vs. supply leak
    By bikeguy18974 in forum Pumps and Tanks Well Forum & Blog
    Replies: 6
    Last Post: 01-16-2008, 05:09 PM
  5. Help! Shower Head attachment to water supply
    By Dongrungio69 in forum Shower & bathtub Forum & Blog
    Replies: 3
    Last Post: 12-07-2007, 07:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •