(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 8 of 8

Thread: Buying New Moen Kitchen Faucet: Local Plumbing Supply

  1. #1
    DIY Junior Member Beski's Avatar
    Join Date
    Jun 2012
    Location
    New Jersey
    Posts
    10

    Default Buying New Moen Kitchen Faucet: Local Plumbing Supply

    We are getting a new Moen Kitchen Faucet installed in a few weeks, and our Plumber directed us to the local Supply House to pick out what we want. He also said to AVOID Lowes or Home Depot as the Faucet "insides" tend not to be the same quality compared to buying at a Supply House (something about plastic internal pieces vs. metal pieces).

    We just bought our Faucet this weekend at the Plumbing Supply but now see it $125 Cheaper online which includes Free Shipping and No Tax. ($500 vs. $375)

    Moen 7594EC Arbor With Motionsense One-Handle High Arc Pulldown Kitchen Faucet, Chrome
    Part # 7594ESRS



    Should I Return the Faucet we just bought to Save $125 ??

    Or is there a better place to buy this On-Line ?

    Thanks,
    Tom
    Last edited by Terry; 12-02-2013 at 03:03 PM.

  2. #2

    Default

    Your plumber is correct about the same faucet at Home Depot being made cheaper. Also, I would suggest keeping the faucet from the supply house. We have seen too many customers buy online but then they can't get warranty issues taken care of without paying for them.

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    There is some truth to lesser quality items at the box stores, but it varies. For example, you will often find a lav faucet with the plastic pop up drain instead of metal , but Moen sells that same thing to all comers.... there are different model numbers, and you could order the same item from a supply store. As far as the internals, I do not believe you find different constructions. The problem with box stores, and with an online vendor, you don't know if someone has fiddled with it and borrowed some parts! Either of those probably has a return policy, but do you need the hassle??? There is some advantage to paying up and dealing with a local supplier/plumber who will stand behind the sale.
    Last edited by Terry; 02-16-2014 at 06:03 PM.

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,638

    Default

    The problem with the big box stores is NOT always a different quality, but often a lack of "final inspection" so you have a higher probability of getting a defective item and having to take it apart then returning it, then reinstalling the new one. Depending on availability, and suppliers do not stock ALL makes and models, I will furnish the faucet if I can find it easily, otherwise I let the customer buy his own and call me when he has it. However, I have had instances when their purchase WAS defective and by the time I had installed, removed, and reinstalled it, including "wait time" while they did the return, the installation cost more than twice what it should have with "good" faucets.
    Licensed residential and commercial plumber

  5. #5
    DIY Junior Member Beski's Avatar
    Join Date
    Jun 2012
    Location
    New Jersey
    Posts
    10

    Default

    THANKS to everybody for their Fast and Helpful replies !!

    OK, that all makes sense, I will stick to the Faucet we have. The Plumber is also installing 3 Toto Drake II Toilets from the same supply house, so I guess we would have some leverage if there was a problem or defective part or we needed any type of warranty service.

    Just wanted to make sure we were doing the right thing !!

  6. #6
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    7,246

    Default

    Good thinking about staying with the real plumbing supply, but it's high unlikely you will have any problems with your new Toto toilets. Toto toilets almost never have a defective part or any other problem.

  7. #7

    Default

    here's how i handle this...if a customer opts to buy any fixture or equipment through me, faucet, sink, toilet, water heater, etc., then I will handle any warranty issues and no charge for service if required on said item for 1 year. If they supply it themselves then I don't give them the same "service warranty". That is my gaurantee that I will stand behind "my products", always bought through plumbing wholesalers.

  8. #8
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,638

    Default

    That is how we do it here also, but when the customer wants some "exotic" brand, we prefer that they furnish it themselves, because any service issue could be a hassle what with ordering parts and waiting for them to be shipped. I once needed some aerator inserts, since they did not sell the entire aerator, and had to wait 3 weeks for them to be shipped from Italy.
    Licensed residential and commercial plumber

Similar Threads

  1. Need advice on buying a new kitchen faucet
    By seschroll in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 04-07-2010, 05:06 PM
  2. MOEN Kitchen Faucet Wierdness
    By montcady in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 13
    Last Post: 01-18-2009, 06:32 PM
  3. More questions on buying a kitchen faucet
    By lynnb in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 02-05-2008, 06:18 AM
  4. Help with Moen kitchen faucet
    By George R in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 7
    Last Post: 02-09-2006, 05:32 AM
  5. Moen Kitchen Faucet
    By sidNJ in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 3
    Last Post: 02-07-2005, 02:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •