Time for a new water softener system.

Users who are viewing this thread

Lifespeed

Member
Messages
402
Reaction score
4
Points
18
Location
California
thanks lifespeed. I'll order 1-1/4" MNPT with optional brass sweat to connect to my home 1-1/4" copper pipes.

I'll have the installer cut the exiting 3/4" pipes and use 1-1/4" through out the system.

Don't forget the optional 32mm distributor tube for the Fleck 7000. I'm sure you'll appreciate the results during those occasional heavy water use events. Let us know how it turns out.
 

Silversaver

Member
Messages
78
Reaction score
1
Points
8
Location
Orange County, CA
This is what I'm ordering:

Tank Color Option:Almond
Insulating Jacket:NO Insulating Jacket
Brine Tank Size:18x33 Round Brine Tank 0
Res-Care Feeder:NO Res-Care Feeder
Resin Media Option:Hi-Capacity Resin - 8% Crosslink
Distributor Tube:With 32MM HI-FLOW Distributor
Turbulator Option:NO Turbulator 12x52 Tank
Plumbing Connection:BYPASS, Noryl 1-1/4" Male NPT
Drain Tubing:WITH Drain Tubing - 10 Ft.

maybe I'll get the brass sweat connection for my copper pipes. I believe I need the Connector Assembly, 1-1/4" x 1-1/2" Brass Sweat w/O-Ring (2-Pack) - 41243-01
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks