(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: Suggestions for bidet seat for American Standard Toilet

  1. #1
    DIY Junior Member portlandbill's Avatar
    Join Date
    Jan 2011
    Location
    Portland Oregon
    Posts
    6

    Default Suggestions for bidet seat for American Standard Toilet

    Terry, do you have any suggestions for a compatible washlet seat for this American Standard toilet? It has a very circular seat.
    I have a Blooming Bidet in the main bathroom, however, the seat pads are a poor fit for this toilet. You actually gave great advice that previous time based on a photo, so I'm hoping you can do it again!
    It's a nice old toilet, however, might be that it needs to be replaced. Particular as I like the new Toto seats but doubt they'll fit this toilet.

    Name:  Toilet-1.jpg
Views: 370
Size:  34.9 KB

    Name:  Toilet-3.jpg
Views: 427
Size:  32.1 KB

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,191
    Blog Entries
    1

    Default

    That's kind of short, but at least there is plenty of room between seat bolts and the tank.
    TOTO has some new less expensive seats that I can add to my shopping cart this week.
    You might also look at the INAX Clessence. Check back Wednesday afternoon and I'll have more information.

    I kinda prefer the elongated bowls if I'm going with a bidet seat though.

  3. #3
    DIY Junior Member portlandbill's Avatar
    Join Date
    Jan 2011
    Location
    Portland Oregon
    Posts
    6

    Default

    Thanks Terry. I'll check back later in the week.
    I'll probably get a remote control model, so presumably the INAX Luscence would be a similar fit to the Clessence.
    For Toto I was interested in the S300e or S350e. From the Toto sizing chart the depth should be a perfect match, but I can't tell on the width "D" measurement. The chart says a minimum of 9" clear from the center of the bowl, however they say nothing about how wide the seat actually is.

  4. #4
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,191
    Blog Entries
    1

    Default

    The E seats from TOTO are "slowly" becoming available. We haven't gotten our first one yet.
    Sometimes marketing is ahead of supply. They're coming though.

  5. #5
    DIY Junior Member portlandbill's Avatar
    Join Date
    Jan 2011
    Location
    Portland Oregon
    Posts
    6

    Default

    Okay, thanks. My strategy will be to switch the toilet to an elongated Toto (presumably a better chance of a good seat fit compared to other brands) and then wait on the washlet until the S350e seat becomes available.

Similar Threads

  1. Seat for American Standard 4040 toilet
    By Candymurphy in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 07-30-2011, 06:40 PM
  2. American Standard Vent-Away seat loose
    By Plumbersmith in forum Toilet Forum discussions
    Replies: 3
    Last Post: 05-27-2009, 09:52 PM
  3. American Standard seat holes are misaligned
    By Justtaint in forum Toilet Forum discussions
    Replies: 9
    Last Post: 03-29-2009, 06:25 PM
  4. Need seat for old American Standard!
    By cobra2773 in forum Toilet Forum discussions
    Replies: 2
    Last Post: 11-10-2006, 02:52 PM
  5. American Standard seat
    By glenndee in forum Toilet Forum discussions
    Replies: 6
    Last Post: 06-19-2006, 08:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •