Just finished a 300 ft deep well. Water is at 172 ft and according to the driller I have 40 gallons per minute. I thought of putting the pump at about 200 ft. There is an additional rise of 110 ft to the house and the house is 700 ft from the well. I have 2 inch pipe in the ditch already and was thinking about a 1 1/4 inch flex from the well. I am thinking I need a 2hp for the 310 lift. I really need a list of what I need to buy to complete the system, and where is the best place to purchase what I need. I also have installed a Geothermal system and a 400 amp service.
In addition, I am thinking of using this well to feed another house down hill another 100 or so in elevation and about 1000 ft from the well. Would it be best to locate something near the well so when the other house needs water it can call for it?
How about the electrical part as well. Submersible in the well and than I can run a fat aluminum cable to the house.
What type of pressure tank would I need in the house. What psi should I have in the house.
I am capable of finishing this, but need help to be sure I have everything I need and purchasing the correct pump/motor size.
Thanks,
Bob in KY
In addition, I am thinking of using this well to feed another house down hill another 100 or so in elevation and about 1000 ft from the well. Would it be best to locate something near the well so when the other house needs water it can call for it?
How about the electrical part as well. Submersible in the well and than I can run a fat aluminum cable to the house.
What type of pressure tank would I need in the house. What psi should I have in the house.
I am capable of finishing this, but need help to be sure I have everything I need and purchasing the correct pump/motor size.
Thanks,
Bob in KY