(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 10 of 10

Thread: When to repair - when to replace?

Hybrid View

  1. #1
    DIY Junior Member shendrick's Avatar
    Join Date
    Dec 2012
    Location
    West of Bosston
    Posts
    5

    Default When to repair - when to replace?

    I've got a 10 year old Sear Power Miser gas hot water heater. it's never had the anode changed and now we're getting yellow hot water. I'm guessing that the yellow water means that the anode is shot and the tank is rusting. If yellow water is a symptom of the tank rusting, I would assume the only option is to replace. Do I have this right?

  2. #2
    Plumbing Contractor for 49 years johnjh2o1's Avatar
    Join Date
    Aug 2009
    Location
    South*East
    Posts
    1,121

    Default

    If it's been ten years since you purchased a gas water heater your in for some sticker shock.

    John

  3. #3
    DIY Junior Member shendrick's Avatar
    Join Date
    Dec 2012
    Location
    West of Bosston
    Posts
    5

    Default

    I know, it will be about $1K for the heater plus a few hundred for installation. Question remains, is it really time to replace or would a new anode do the trick?

  4. #4
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,382

    Default

    If the yellow is rust, it's unlikely a new anode will resolve the problem. But, first, is the hot water colored at every outlet? If not, it's not the WH, but likely the piping to the thing that does have the yellow water.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  5. #5
    DIY Junior Member shendrick's Avatar
    Join Date
    Dec 2012
    Location
    West of Bosston
    Posts
    5

    Default

    Yes, yellow at every hot water outlet.

  6. #6
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,191
    Blog Entries
    1

    Default

    That may be more than an anode rod.
    One thing you may do is connect a hose to the drain and see if you can flush the tank out.

Similar Threads

  1. Repair or Replace?
    By momof6 in forum Water Softener Forum, problems, installation and reviews
    Replies: 3
    Last Post: 11-18-2010, 09:20 AM
  2. Repair or replace?
    By adamw in forum Water Heater Forum, Tanks
    Replies: 13
    Last Post: 12-13-2009, 02:38 PM
  3. Repair, replace, or????
    By david3394 in forum Pumps and Tanks Well Forum & Blog
    Replies: 4
    Last Post: 08-10-2009, 01:32 PM
  4. Replace or repair windows?
    By ayawi in forum Remodel Forum & Blog
    Replies: 15
    Last Post: 05-12-2008, 10:18 AM
  5. repair or replace pvc connection?
    By tj440 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 03-14-2006, 02:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •