(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Culligan Sulfur-Cleer Not Regenerating

  1. #1
    DIY Junior Member egal4life's Avatar
    Join Date
    Dec 2012
    Location
    Illinois
    Posts
    1

    Default Culligan Sulfur-Cleer Not Regenerating

    Hi -

    I purchased a Culligan Sulfur-Cleer system a couple of years ago, and now the system has stopped regenerating. Basically to regenerate, I fill a bottle with a bleach/water mixture and attach it to this hose that's connected to my unit. During the regeneration process, it's supposed to suck up the bleach/water mixture from the bottle while its backflushing to clean out the filter media. I generally do this bleach regeneration every 4 weeks as recommended by Culligan. The last time I went to regenerate the system, I noticed that the bottle had some of the liquid still in the bottom but was mostly empty. I filled the bottle up again at least a month ago and its almost completely full still so the system clearly isn't pulling any liquid during the backflushing process.

    Has anyone had any problems like this before or know what could be checked before spending $130 to have Culligan come out and look at it? Of course the owner's manual says nothing about this problem. Thanks for your help!

  2. #2
    In the Trades Akpsdvan's Avatar
    Join Date
    Dec 2009
    Location
    Alaska
    Posts
    1,471

    Default

    Most likely the injector is plugged with something and stopping the bleach from getting drawn in the main media tank.

    With the changes that Culligan has under gone of late I am not sure as too what valve you have.

Similar Threads

  1. Culligan Gold/Silver Regenerating daily
    By Dankon in forum Water Softener Forum, problems, installation and reviews
    Replies: 9
    Last Post: 04-20-2012, 04:53 PM
  2. Culligan Iron Cleer problems.....
    By vnvet in forum Water Softener Forum, problems, installation and reviews
    Replies: 38
    Last Post: 02-15-2010, 03:41 PM
  3. Kinetico Sulfur Guard vs. Culligan Iron-Cleer
    By marcopolo in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 08-21-2009, 01:15 PM
  4. Kinetico Sulfur Guard vs. Culligan Iron-Cleer
    By marcopolo in forum Water Softener Forum, problems, installation and reviews
    Replies: 1
    Last Post: 08-21-2009, 01:12 PM
  5. Kinetico Sulfur Guard vs. Culligan Iron-Cleer/Gold Softner
    By marcopolo in forum Water Softener Forum, problems, installation and reviews
    Replies: 2
    Last Post: 08-21-2009, 01:09 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •