I just received my special order countertop, for my vessel bowl, from LOWES. I notice that the hole that was drilled for the drain, is not located at the center of the countertop. The hole is in the center as far as the x-axis (left to right) is concerned, but the y-axis (from the wall, to where I'd be standing), is off by at least 2". The hole is closer to where I'm standing. I put the vessel bowl on the countertop, and I notice that the edge of the bowl, is about 1" from the edge of the countertop. Is that normal, or should I bring the countertop back to LOWES? Please advise.