GE GXSF40H Brine tank overflowing

**KStatefan** · 12-11-2012, 05:33 PM

I have a GE water softner that is not pulling brine from the tank. I have cleaned the nozzle and venturi assembly. Any suggestions on what to look for next?

**Tom Sawyer** · 12-12-2012, 05:09 AM

Loose fittings on the brine line

**mialynette2003** · 12-12-2012, 07:06 AM

Put the unit into a brine draw cycle. Disconnect the brine line from the valve. If water is coming out, than you need a rotor seal kit and possible a rotor.

**KStatefan** · 12-12-2012, 05:54 PM

Originally Posted by mialynette2003

Put the unit into a brine draw cycle. Disconnect the brine line from the valve. If water is coming out, than you need a rotor seal kit and possible a rotor.

Thanks That seems to be the issue.