(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: How to determine what kind can light

  1. #1

    Default How to determine what kind can light

    I'm getting ready to add another layer of insulation in the attic. I have 3 can lights that were probably installed in the past 10 years but there's no label indicating if I can insulate around them. I've looked up in the attic and removed the baffles to look for any information. Is there a way to determine this?

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,382

    Default

    There's a label somewhere on the can - it might be inside under the trim. If it's not IC rated, you must leave space around and above it. You can use a box around it if it leaves at least the minimum space, and put insulation on top of that, though. You need space to the sides and the top.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

Similar Threads

  1. Help to determine which is Vent
    By donfenyk in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 12
    Last Post: 12-24-2009, 09:15 AM
  2. DIY - Split receptacle to light switch and light fixture with 14/2?
    By AJM in forum Electrical Forum discussion & Blog
    Replies: 17
    Last Post: 11-24-2009, 04:36 PM
  3. pilot light wont stay light on furnace
    By possum in forum HVAC Heating & Cooling
    Replies: 2
    Last Post: 10-07-2008, 12:48 PM
  4. How to determine rough-in
    By jechow in forum Toilet Forum discussions
    Replies: 2
    Last Post: 06-09-2008, 06:49 AM
  5. How to determine what length faucet I need
    By bleon0 in forum Remodel Forum & Blog
    Replies: 0
    Last Post: 07-19-2005, 12:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •