Then you can use an end outlet disposer kit with a baffle tee pointing down.
![]()
|
|
|
I have read here the disposal should be opposite the P-trap on a dual bowl kitchen sink set up. I am curious as to why that isrecommended.
Last edited by Terry; 11-23-2012 at 10:58 AM.
Then you can use an end outlet disposer kit with a baffle tee pointing down.
![]()
The piping can get "complicated" if you have to try to fit the disposer and the trap in the same area. A minor point, but the only time you install a "Disposal" is if you are using a GE or Hotpoint unit. ALL the rest or "disposers", and GE gets upset when people call them Disposals.
Licensed residential and commercial plumber
Bookmarks