This is what i did using the figures from; http://www.caitechnologies.com/image...pecs/SST60.pdf
Capacity = 30,000
Hardness = 40
Reserve = 120 gallons
Days Override = 8
Backwash = 5 minutes
BrineDraw = 30 minutes
Rapid Rinse = 8 minutes
Brine Fill = 4 minutes (there is a sticker on the WS that says .5 gallon /1.5lbs)
So, 30,000 grains / 6lbs should be 5,000 salt efficiency ?
Can this bad boy softener do it well?
I figure that I might get away with these reduced times because I have great pressure (I know the unit will restrict) and am dosing at such a low level. I figure worst case it doesn't work and I try a lower salt efficiency (re-figure everything again) and send Gary hate mail for being correct. Or I can bump up the BF setting to get me 7.5lbs and a 4,000 efficiency.
BTW; a 47 minute regen is kewl