(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Help with Culligan Silver Series

  1. #1
    DIY Junior Member yeomanflood's Avatar
    Join Date
    Nov 2012
    Location
    California
    Posts
    1

    Default Help with Culligan Silver Series

    Hello. I purchased a home that came with a Culligan Silver Series softener - I think it's about 10 years old since the home is about that old. I'm not partial to Culligan myself...but it was working fine for the last year. We lost power the other day, but I know that Culligan has a capacitor or something that enables it to remain on for 24 hours - we don't lose power for 24 hours ever.
    So the other day I checked my salt and it was surprisingly pretty low. Well, I noticed it was turning on every night. The panel has the word "Regen" on permanently - it blinks when it's in regeneration mode.
    I double checked the settings and it looks all relatively standard to me, having looked at the Culligan manuals online in the programming sections. Previously, I think it used to regenerate maybe every 3-4 days or so since we don't use that much water usually.

    Anyone have any thoughts as to why it's stuck in lit "regen" mode - but actually regenerating every night at the preset time of 2AM, and doing this every day?

    Thanks a lot in advance. I loathe the idea of having to call Culligan.

  2. #2
    In the Trades Akpsdvan's Avatar
    Join Date
    Dec 2009
    Location
    Alaska
    Posts
    1,464

    Default

    Sounds like the need of the programing manual that culligan has.
    I have a pdf of that and if you are good with computers then the book will work for you.
    Send a pm with an email and I can send it to you.

  3. #3
    DIY Member rjh2o's Avatar
    Join Date
    May 2011
    Location
    Michigan
    Posts
    75

    Default

    They NEVER keep the programming! It always resets to factory settings and if a power surge happened it may have fried the board sending a signal to constantly regenerate particularly if there was a signal to regen that evening.
    Unplug it for 2 minutes, plug back in and set hardness according to your water chemistry. If that does not work you need a new board.
    RJ

Similar Threads

  1. Culligan Gold/Silver Regenerating daily
    By Dankon in forum Water Softener Forum, problems, installation and reviews
    Replies: 9
    Last Post: 04-20-2012, 04:53 PM
  2. Replacing a Delta 1300 series with a 1700 series
    By desvio in forum Shower & bathtub Forum & Blog
    Replies: 6
    Last Post: 12-30-2011, 06:42 AM
  3. Culligan silver not metering flow
    By Merc13 in forum Water Softener Forum, problems, installation and reviews
    Replies: 4
    Last Post: 09-29-2011, 06:51 AM
  4. Culligan Gold series softener has constant overflow
    By kerby in forum Water Softener Forum, problems, installation and reviews
    Replies: 2
    Last Post: 10-14-2010, 06:46 PM
  5. Silver solder 4%?
    By ron350 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 3
    Last Post: 10-12-2007, 10:26 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •