(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 15 of 16

Thread: Can you guys double check my drainage?

Hybrid View

  1. #1
    DIY Junior Member bobby614's Avatar
    Join Date
    Oct 2012
    Location
    Ohio
    Posts
    5

    Default Can you guys double check my drainage?

    I am remodeling my second floor bathroom. I was hoping you guys could quickly look over anything to make sure I am not missing anything vital.
    Name:  027.jpg
Views: 148
Size:  80.5 KB
    Name:  029.jpg
Views: 149
Size:  73.4 KB
    Name:  030.jpg
Views: 150
Size:  63.5 KB
    Name:  031.jpg
Views: 144
Size:  76.6 KB
    Attached Images Attached Images  

  2. #2
    DIY Junior Member bobby614's Avatar
    Join Date
    Oct 2012
    Location
    Ohio
    Posts
    5

    Default

    Name:  033.jpg
Views: 145
Size:  55.6 KBName:  034.jpg
Views: 146
Size:  80.0 KB

  3. #3
    DIY Member jadziedzic's Avatar
    Join Date
    Aug 2006
    Location
    New Hampshire
    Posts
    86

    Default

    The most vital thing you're missing is the structural integrity of the floor: it appears you have chopped out large sections of (at least) three of the floor joists to run drain pipes within the space.

    Fixing that issue will require you to remove all of the drain piping you've modified / added.

    By the way, the electrical connection to those recessed lights is wrong; the incoming wire needs to be secured via a clamp where it enters the junction box.

  4. #4
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    That belly in the vent where it passes under the toilet drain is an absolute no-no.

  5. #5
    In the Trades Tom Sawyer's Avatar
    Join Date
    Nov 2010
    Location
    Maine
    Posts
    2,942

    Default

    The toilet vent is flat and useless. The belly in the vent for the down stairs shower/lav is useless. The notch in the floor joist is not allowed either.
    [B]No, plumbing ain't rocket science. Unlike rocket science, plumbing requires a license[B]

  6. #6
    DIY Senior Member dlarrivee's Avatar
    Join Date
    Jun 2009
    Location
    Canada
    Posts
    1,172

    Default

    Why do folks think that floor joists are optional?

  7. #7
    DIY Junior Member bobby614's Avatar
    Join Date
    Oct 2012
    Location
    Ohio
    Posts
    5

    Default

    Quote Originally Posted by dlarrivee View Post
    Why do folks think that floor joists are optional?

    I ask myself the same thing.
    Last edited by bobby614; 11-01-2012 at 07:58 AM.

  8. #8
    Nuclear Engineer nukeman's Avatar
    Join Date
    Nov 2009
    Location
    VA
    Posts
    696

    Default

    Is the lav/tub on 1-1/2" or is that 2"? If you used 2", you could have wet vented everything in that bathroom through the lav. I believe that Ohio is on IPC. If so, the distance to vent for the toilet is unlimited.

    For the vent with the belly, it should work in most cases (if it stays dry), but inspectors won't like it. It could fill up with rain water or condensation and form a trap, making the vent useless.

    I also agree with the others on the structural issues. Those notches are not allowed. It will be especially bad if you are going to tile the floor and the tile/grout will crack with the floor movement.

    On the toilet, make sure you get the center on the flange 12" from the finished wall (account for drywall and tile (if wall will be tiled)). If you are short, you will have a harder time finding a toilet.

  9. #9
    DIY Junior Member bobby614's Avatar
    Join Date
    Oct 2012
    Location
    Ohio
    Posts
    5

    Default

    Quote Originally Posted by nukeman View Post
    Is the lav/tub on 1-1/2" or is that 2"? If you used 2", you could have wet vented everything in that bathroom through the lav. I believe that Ohio is on IPC. If so, the distance to vent for the toilet is unlimited.

    For the vent with the belly, it should work in most cases (if it stays dry), but inspectors won't like it. It could fill up with rain water or condensation and form a trap, making the vent useless.

    I also agree with the others on the structural issues. Those notches are not allowed. It will be especially bad if you are going to tile the floor and the tile/grout will crack with the floor movement.

    On the toilet, make sure you get the center on the flange 12" from the finished wall (account for drywall and tile (if wall will be tiled)). If you are short, you will have a harder time finding a toilet.

    Yes, the lav/tub is on 1-1/2".

    I believe Ohio requires a vent if a toilet is more than 6' away from stack. Its roughly 5' so I might go ahead and eliminate the vent for the toilet and cap it?

    With the structural issues, I plan on sistering the joists the best that I can. They are non-loadbearing, and have been this way for 12+ years, no sagging or structural issues have came up.

    Yes, I do plan on tiling. 3/4 CDX plywood, DITRA, and mosaic porcelain tile. Deflection rating can be lower than normal.

    The toilet drain is roughly 15" away from wall. I plan on getting one of the TOTOs with unifit. I did not want to hack through the joist to make it a 12" rough in.
    Last edited by bobby614; 11-01-2012 at 08:03 AM.

  10. #10
    DIY Junior Member bobby614's Avatar
    Join Date
    Oct 2012
    Location
    Ohio
    Posts
    5

    Default

    Quote Originally Posted by Tom Sawyer View Post
    The toilet vent is flat and useless. The belly in the vent for the down stairs shower/lav is useless. The notch in the floor joist is not allowed either.
    The toilet vent is sloped as if it were a drain, 1/4 per foot.

    The belly in the vent for the downstairs shower/lav may not be up to code, but it still works for the downstairs lav, right? Its above the flood rim of its fixture.

    Floor joists had existing notches in them. I just bought the house.

Similar Threads

  1. Swing Check vs. dual check vs. double check valve
    By colbymom in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 25
    Last Post: 05-10-2011, 01:19 PM
  2. Double check my plan
    By pghsebring in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 6
    Last Post: 03-31-2010, 10:43 AM
  3. Do you guys do drainage questions?
    By RCraig in forum Pumps and Tanks Well Forum & Blog
    Replies: 24
    Last Post: 12-25-2008, 01:25 PM
  4. Double Check Valves .............. Again!
    By tvl in forum Pumps and Tanks Well Forum & Blog
    Replies: 3
    Last Post: 08-11-2006, 08:29 AM
  5. Drainage Industries 2" in-line check valve
    By PaulGray in forum Pumps and Tanks Well Forum & Blog
    Replies: 3
    Last Post: 05-11-2006, 01:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •