(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Sched 40 pipe 2"

  1. #1
    DIY Junior Member syncman's Avatar
    Join Date
    Oct 2012
    Location
    Marietta GA
    Posts
    5

    Default Sched 40 pipe 2"

    Spa problem. Cut between 2 PVC fittings to remove a cracked part. No pipe was showing, so I cut between the 2. This means no pipe showing to glue the new fitting. The remaining fitting is a 5 port flange that is not cracked.

    http://www.****.com/itm/2-S-PVC-Mani...685?pt=LH_Defa...

    This is really locked in there. To change that as well would mean re-piping half the tub, plus a lot of insulation stripping. Is there a "repair fitting, coupling, elbow " that would go INSIDE the remnants of the 2" pipe, instead of outside? Maybe a different diameter pipe? A pipe Hog wont work because of all the pipes from another manifold are in the way.

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,655

    Default

    There are "inside" couplings, but good luck finding one. Normally it would be a special order and you would have to buy a "boxful" of them, but try here http://stores.drainageproducts.us/-s...ule/Detail.bok
    Licensed residential and commercial plumber

Similar Threads

  1. "real-world" vintage cast iron pipe cutting?
    By zimmee66 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 9
    Last Post: 04-04-2013, 01:07 PM
  2. Shower Steam Generator Pipe in Contact with "Pink" Insulation
    By JuanSigned in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 01-30-2011, 04:52 PM
  3. What is best/safest way to cut cast iron drain pipe (or "undo" the fittings)?
    By diecastdawg in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 6
    Last Post: 01-19-2010, 10:53 AM
  4. Do I really need the "Water Stop Device"? (Washing machine inlet pipe)
    By Mr Skills in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 15
    Last Post: 11-18-2008, 05:47 PM
  5. Sched 40 or 30?
    By HemiMoparGuy1981 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 5
    Last Post: 07-11-2008, 02:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •