(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: vessel sink- what else to get ? faucet type ?

  1. #1

    Default vessel sink- what else to get ? faucet type ?

    I am looking at getting this sink.

    http://www.irawoods.com/DecoLav-1425...category=48094

    it does not have an overflow hole.

    Will this cause a problem with slow draining as I have been reading or is this remediable with some other parts installed ?
    I am also looking for a specific type of faucet, is there any requirement for specific type of faucet for a vessel sink ?
    will this work ?
    http://www.irawoods.com/Grohe-32-642...arlight-Chrome

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,679

    Default sink

    You may have a drainage problem unless the drain you use has an opening large enough to allow the trapped air to exit. That faucet is too low. You either need a wall mounted one, or one with a tower to raise it above the sink.

  3. #3
    DIY Junior Member Rob Parisi's Avatar
    Join Date
    Oct 2012
    Location
    New Hampshire
    Posts
    7

    Default

    Too bad the link is broken.
    Thanks,

    Rob Parisi | PoshHaus.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •