(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Installed new kitchen sink and water lines don't reach now, need to get an extension

  1. #1
    DIY Member jasper7821's Avatar
    Join Date
    Sep 2012
    Location
    Arizona
    Posts
    39

    Default Installed new kitchen sink and water lines don't reach now, need to get an extension

    Sorry if this is a stupid question,
    I installed a new sink from a double basin to a single one in my island and the faucet is now on the other side of the hot and cold valves and the new faucet lines don't reach the valves.

    Is there a male to male extension that is a few feet long or something to make the connection.
    Thanks.
    Last edited by jasper7821; 09-29-2012 at 08:22 AM.

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,201
    Blog Entries
    1

    Default

    1/2" MIP x 3/8" comp brass fitting and a standard lav supply added to what you have does that.

  3. #3
    DIY Member jasper7821's Avatar
    Join Date
    Sep 2012
    Location
    Arizona
    Posts
    39

    Default

    great thank you very much I really appreciate it. went to Ace Hardware and everything is working perfectly.

Similar Threads

  1. New Kitchen Sink Wall Bend Extension?
    By schwem in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 4
    Last Post: 02-07-2011, 11:07 AM
  2. New kitchen sink, questions about drain lines
    By dutzig in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 5
    Last Post: 09-13-2009, 10:25 AM
  3. Moving drain lines and water lines for pedestal sink
    By ChuckVA in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 5
    Last Post: 09-10-2007, 03:56 PM
  4. Installed new kitchen sink, but no water?
    By spencka in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 6
    Last Post: 07-22-2007, 10:00 AM
  5. jetpump won't reach 50 PSI, installed new pressure switch
    By mjasoncole in forum Pumps and Tanks Well Forum & Blog
    Replies: 10
    Last Post: 10-20-2006, 08:13 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •