(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Sand point well pressure

  1. #1
    DIY Junior Member S0394387's Avatar
    Join Date
    Sep 2012

    Default Sand point well pressure

    I have a new sand point well that that I have driven for an underground sprinkler system and have some questions. I am down about 32 feet and hit water at about 20 to 25 feet. I put a check valve right above the point (this might have been a bad idea). It is running off a 1 HP shallow well jet pump and getting about 11 GPM straight out of the pump. I know that this will drop once I restrict the flow to get enough pressure. I am concerned about getting good pressure and not sure the best way to go about testing this. I am thinking that I can hook up a few above ground sprinklers with a pressure gauge attached but I donít know if this will be an accurate method. I fear that I will find that I am unable to get the required flow at the required pressure to run the system. The zones are not laid out yet so I am trying to get this info to design my system.

  2. #2
    DIYer, not in the trades LLigetfa's Avatar
    Join Date
    Feb 2011
    NW Ontario, Canada


    Put a ballvalve on it along with a pressure gauge before it. Slowly close the valve and watch the pressure and measure the GPM of flow. Match the results of the test to the sprinkler head requirements.

  3. #3
    DIY Member bcpumpguy's Avatar
    Join Date
    Jul 2012
    Langley BC


    if the 11 GPM keeps up for a couple of hours you'll be fne, it just depends on how many sprinkles you want to run at a time you can do 11GPM at 60 psi, just depends on the hp of the pump. What model pump and hp are you using right now? it could be that you are just running at the max of the pump right now and that your sandpoint is capable of more.

Similar Threads

  1. new sand point system losing pressure
    By trapper1 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 02-02-2012, 10:08 AM
  2. New Sand point
    By Bigland in forum Pumps and Tanks Well Forum & Blog
    Replies: 10
    Last Post: 07-12-2011, 07:48 PM
  3. New Sand Point
    By ton in forum Pumps and Tanks Well Forum & Blog
    Replies: 0
    Last Post: 11-23-2009, 11:31 AM
  4. Sand Point Well Jax, FL HELP!!!!
    By Trafalgar in forum Pumps and Tanks Well Forum & Blog
    Replies: 9
    Last Post: 06-17-2008, 05:48 AM
  5. sand point well suging pressure
    By lcon in forum Pumps and Tanks Well Forum & Blog
    Replies: 0
    Last Post: 06-24-2007, 11:56 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts