(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Code question 277 and 24 volts same fixture.

  1. #1
    DIY Junior Member Lionsfniniowa's Avatar
    Join Date
    Sep 2012
    Location
    Iowa
    Posts
    1

    Default Code question 277 and 24 volts same fixture.

    Here is my case. I hired a contractor that wired 277 volt floesent fixtures. He added a 12 volt motion sensors on the circuit. Instead of placing the control box on a servicable wall he place them inside the first fixture under the canopy. Is this legal? I thought you could not mix wire voltages in the same box. As far as I know fixtures cant be used as a junction box? This is in a school in the State of Iowa.

  2. #2
    Electrician ActionDave's Avatar
    Join Date
    Feb 2009
    Location
    Colorado
    Posts
    326

    Default

    Can't say for sure from what you have described. You can use the fixture to junction wires that are associated with the light. As far as mixing voltages it depends on how the motion sensor is meant to be used.

    The person that can give you a complete answer is your electrical inspector.

  3. #3
    Electrical Contractor/Instructor jwelectric's Avatar
    Join Date
    Jun 2007
    Location
    North Carolina
    Posts
    2,523

    Default

    As long as the insulation of the low voltage is rated for line voltage then they can be in the same enclosure.

    What make you think that the sensor is at 24 volts?

  4. #4
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    Quote Originally Posted by jwelectric View Post
    What make you think that the sensor is at 24 volts?
    I was kind of wondering about that....not so common.

Similar Threads

  1. Refrigerator is Hot - 120 Volts at Handle
    By molo in forum Electrical Forum discussion & Blog
    Replies: 35
    Last Post: 02-11-2012, 06:38 AM
  2. 115 volts or 220 volts to well pump
    By JoeBarth in forum Pumps and Tanks Well Forum & Blog
    Replies: 26
    Last Post: 08-21-2008, 06:00 AM
  3. What's the difference between 240 volts and 220 volts?
    By Erico in forum Electrical Forum discussion & Blog
    Replies: 23
    Last Post: 08-16-2008, 05:52 PM
  4. 14.4 volts vs 18 volt for homeowner
    By ctkeebler in forum Remodel Forum & Blog
    Replies: 17
    Last Post: 04-22-2008, 04:55 AM
  5. Tub Only Fixture Question
    By OldPete in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 5
    Last Post: 09-26-2006, 08:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •