It looks like it should work.
Moen 90 series trip lever
Does anyone know if the Moen Toilet levers, specifically the Waterhill, will fit the Toto Soiree. It says it will work with most front-mount toilets, but there's no way to confirm when calling Moen or Toto.
Looking inside the tank of the Toto Soiree
Last edited by Terry; 02-15-2014 at 10:26 AM.
The Toto lever is on an angled surface, but the Moen lever should work as long as it can be bent to match the angle.
Licensed residential and commercial plumber
For max reliability, the end of the arm of the lever must be above the flapper, and nearly centered so it can pull almost straight up. Hard to say if it can be bent to match up without seeing it in person or a really god photo. The hole through the tank is probably about the same, but that's not an absolute (but you can measure the Toto's hole and compare to the drawing).
Important note - I'm not a pro
Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014