(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 6 of 6

Thread: How to install CSV and Pressure with my setup?

  1. #1
    DIY Junior Member SSmith's Avatar
    Join Date
    Sep 2012
    Location
    Alberta, Canada
    Posts
    2

    Default How to install CSV and Pressure with my setup?

    Today we had a brief power outage and now I have no water and the Gundfos CU301 is beeping....

    The pump is ok as I moved the wires from the pump to the power and we have lots of water that way.....

    Anyways I think it is time for me to switch to the CSV and Pressure switch method.....

    I am enclosing a few pictures of my setup now, and would appreciate it if someone could advise me where I need to install the CSV and pressure switch, as well as the exact parts I need to procure....
    Attached Images Attached Images    
    Last edited by SSmith; 09-01-2012 at 06:52 PM.

  2. #2
    Porky Cutter,MGWC Porky's Avatar
    Join Date
    Jan 2008
    Location
    Virginia Beach, VA
    Posts
    727

    Default

    It's quite simple but let's hear it from the expert/inventor, Kerry Austin! I'm sure he'll respond on or before Tuesday!
    Porky Cutter, MGWC
    (Master Ground Water Consultant)

  3. #3
    DIYer, not in the trades LLigetfa's Avatar
    Join Date
    Feb 2011
    Location
    NW Ontario, Canada
    Posts
    3,687

    Default

    Not Kerry, Cary, AKA valveman.

  4. #4
    DIY Junior Member SSmith's Avatar
    Join Date
    Sep 2012
    Location
    Alberta, Canada
    Posts
    2

    Default

    Quote Originally Posted by LLigetfa View Post
    Not Kerry, Cary, AKA valveman.
    Thanks guys.....

    Is there anywhere in Canada that supplies the valves?

  5. #5
    DIYer, not in the trades LLigetfa's Avatar
    Join Date
    Feb 2011
    Location
    NW Ontario, Canada
    Posts
    3,687

    Default

    There is not a comprehensive list of dealers or distributors In Canada. That said, Ingram is in BC.

    http://www.wellrehabilitation.ca/ind...le-stop-valves

    Valveman might be able to give you some referrals.

  6. #6
    Porky Cutter,MGWC Porky's Avatar
    Join Date
    Jan 2008
    Location
    Virginia Beach, VA
    Posts
    727

    Default

    A pside-kick http://www.cyclestopvalves.com/products.html is a kit (with instructions) that replaces your present VFD computer and sensor. Check it out or call Cycle Stop Valves @ 800-652-0207 they will be happy to assist you on Tuesday.
    Porky Cutter, MGWC
    (Master Ground Water Consultant)

Similar Threads

  1. New Setup installed today and still want more pressure... Myer HJ75D
    By larryruest in forum Pumps and Tanks Well Forum & Blog
    Replies: 11
    Last Post: 08-20-2011, 06:34 PM
  2. Pressure Regulator install Q
    By BrianPlumBrian in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 4
    Last Post: 05-04-2007, 06:04 AM
  3. Where to install a pressure regulator
    By Guest in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 12
    Last Post: 01-25-2006, 04:14 AM
  4. Where to install pressure regulator?
    By Vitaliy in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 09-01-2005, 08:13 PM
  5. can I install a second pressure tank?
    By cselwitz in forum Pumps and Tanks Well Forum & Blog
    Replies: 8
    Last Post: 06-25-2005, 10:14 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •