(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Sterling Accord Shower questions

  1. #1
    DIY Junior Member Mr Russ's Avatar
    Join Date
    Jul 2012
    Location
    LA.
    Posts
    10

    Default Sterling Accord Shower questions

    I have installed a 60'' wide Sterling Accord shower and i have questions regarding installing shower doors. The bottom piece has a radius from the curb to the sidewall and it also isnt straight. Just at the top of the radius it is 56-1/4'' wide inside to inside. At the top of the bottom piece it widens to 56-5/8''. It seems to be molded this way.

    Is this normal? How would i deal with this when installing the shower door.

    thinking of getting this door

    http://www.us.kohler.com/us/Fluence-...uestid=559573#
    Last edited by Terry; 08-31-2012 at 12:21 PM.

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,448

    Default

    If you read the installation instructions, they tell you to use a file to contour the parts to fit the curves of the shower. A bit harder than just cutting it straight, but that's what's required to get a good, water-tight fit.

    Personally, if I had to do it over again, I wouldn't buy a Kohler shower door; I'm not thrilled with the fit and finish of mine and it's only about 6-years old. I might break down and buy a new one, and trash the thing. Inertia has held me back (and the money, too!). Eventually, it'll look crappy enough that I'll break down and do it.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    DIY Junior Member Mr Russ's Avatar
    Join Date
    Jul 2012
    Location
    LA.
    Posts
    10

    Default

    OK thanks. Is there a particular brand that you recommend for the door?

  4. #4
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,448

    Default

    It's been awhile since I did a search for shower doors. My tub is 6' rather than the more common 60", and I was trying to stay off-the-shelf, and not go custom to save some money. There were few choices, and Kohler was one of them. With a 60" tub, you'll have lots more choices.

    The reasons I'm not thrilled with the Kohler door: it's white, powder-coated finish and chunks have popped off in various places, the handles/towel bars are really flimsy, the track design (it's a semi-framless, i.e., a frame on the top and bottom) has lots of friction, the holes in the glass to attach things were not clean - there were chips all around the edges - chips are where cracks start (think they bought the glass from China!), the bearings out of the box were not great and the thing never slid nice and smooth or quietly from new, the bracket to hang the door had several holes, and the lowest one was still too high. Consider that you don't cut the verticals, they should know how high the thing should be! Their design for sealing the ends is poor. It was not a pleasant purchase when you add into the fact that they promised delivery from the factory in two weeks, and it took over four months (not that big a problem, as my self-remodeling project dragged on). But, to have the distributor call, be promised it would be shipped today, then find out it wasn't over and over again...I lost faith in them. IMHO, Kohler has some nice designs, but they also have some dogs - they are a NIH kind of company, and kind of snobby. They seem to want to do things their way, when everyone else does it different, just to be different, not necessarily better.

    We have some great engineers in this country, but corporate attitude and direction for them is critical to producing great product...I think they've lost focus. For that reason, when I do shop for something, I avoid them. Your results may differ. This is one person's opinion...

    With most designs, when the corners of the enclosure are not square, you will have to do some custom fitting.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

Similar Threads

  1. Sterling Accord bathtub, installation with pictures
    By tubdummy in forum Shower & bathtub Forum & Blog
    Replies: 5
    Last Post: 11-13-2013, 09:04 PM
  2. Comments - STERLING PLUMBING (KOHLER) ACCORD SEATED SHOWER STALL
    By chuck b in forum Shower & bathtub Forum & Blog
    Replies: 2
    Last Post: 01-29-2011, 07:40 AM
  3. Replies: 0
    Last Post: 01-03-2011, 10:26 AM
  4. Replies: 7
    Last Post: 03-10-2010, 12:44 PM
  5. Sterling Accord Installation
    By alpbach in forum Shower & bathtub Forum & Blog
    Replies: 0
    Last Post: 01-25-2010, 02:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •