(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Program help w/ Fleck 7000SXT as BW filter only

  1. #1
    DIY Junior Member
    Join Date
    Aug 2012
    Location
    Oregon
    Posts
    1

    Smile Program help w/ Fleck 7000SXT as BW filter only

    Does anyone have a link to or easy written instructions for programing a Fleck 7000SXT to use only as a backwash for an iron filter?? Thanks for any assistance. I still have thin skin but after reading several of these threads my skin is thickening already. No softball played on this site, I guess.

  2. #2
    Water systems designer, R&D ditttohead's Avatar
    Join Date
    Jan 2012
    Location
    California
    Posts
    1,707
    Blog Entries
    1

    Default

    In general, the 7000SXT backwash filter programming is just fine as the default. The only thing you would need to program is the backwash frequency. This is done by pushing and hold the up and down arrow buttons for about 8 seconds. This will get you into low level programming.

    DO is the regeneration frequency. For a Carbon tank in most applications, every 7-30 days is just fine. For an iron removal system, more often, every day to every 5 days depending on many variables.
    RT is regeneration time, leave at 2:00

    Let me know if you need more information.


    http://www.pentairwatertreatment.com...ck+7000SXT.htm

    here is the service manual which includes full programming.

  3. #3
    That's all folks! Gary Slusser's Avatar
    Join Date
    Aug 2004
    Location
    Wherever I park the motorhome.
    Posts
    6,790

    Default

    Barclay, you'll need to post your info and data so as Dittohead or others can actually tell you how frequently you should backwash the filter, and for how long it and the rinse should run for. (is that soft enough fer ya?)
    Gary Slusser Retired (= out of business)
    Click Here to learn how to correctly size or program a water softener.
    CAUTION, as of Nov 12 2013 all YouTube videos showing how to rebuild a Clack valve have an error in them that can cause damage.

Similar Threads

  1. Fleck 7000SXT 32k Noise Troubleshooting and Programming
    By kaisersoze in forum Water Softener Forum, problems, installation and reviews
    Replies: 3
    Last Post: 08-31-2012, 11:09 AM
  2. My new Fleck 7000sxt
    By fdny37 in forum Water Softener Forum, problems, installation and reviews
    Replies: 13
    Last Post: 07-30-2012, 11:24 AM
  3. days remaining Fleck 7000SXT?
    By lifespeed in forum Water Softener Forum, problems, installation and reviews
    Replies: 11
    Last Post: 06-07-2012, 11:06 PM
  4. Reserve Selection for Fleck 7000SXT
    By Wally107 in forum Water Softener Forum, problems, installation and reviews
    Replies: 29
    Last Post: 11-12-2011, 12:16 PM
  5. Slow Brine fill on new Fleck 7000SXT
    By snortindog in forum Water Softener Forum, problems, installation and reviews
    Replies: 8
    Last Post: 09-09-2009, 02:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •