Have a lav faucet in my bathroom that was not installed tightly and moved about 1/4" or less. I reached up and tightened the plastic nuts and now the faucet is securely attached to my sink.
My question is: since I have chrome plated copper tubing connecting this faucet to the shut off valves, was this movement enough to jeopardize the 3/8" compression joint at the valve? There are no drips, leaks, etc... and have not been since this occurred. Is this something I should worry about, as I have little knowledge of compression fittings. Thanks so much for any advice!
My question is: since I have chrome plated copper tubing connecting this faucet to the shut off valves, was this movement enough to jeopardize the 3/8" compression joint at the valve? There are no drips, leaks, etc... and have not been since this occurred. Is this something I should worry about, as I have little knowledge of compression fittings. Thanks so much for any advice!