My valve is the Fleck 5600 SXT. Salt tank measures 14" x 16" X 32" tall
The white tape mark on the salt tank shows my water line after regen this morn.
It ran for 8 minutes before almost overflowing (and being shut off by the float) at .5 gpm. So it can handle 12 lbs of salt but that would be the max.
Gary, I agree with everything stated. I wasn't sure if I should lower to 36K so thanks for clarifying. A few questions; Lowering the time of the brine fill to 8 min at .5 gpm will effectively set it to 12lbs of salt correct ? And since I just regenerated with Iron out this morning should I do it again this evening or omit it from the back to back regeneration.
Thanks for all the help.