Replacing cu301 controller

Having read previous forums (now closed) it seems that what need to do is install a csv1 and a 50/70 pressure switch. I am still confused about the issue of the SQE pump shutting down after 250 cycles with no communication from the controller.
What if anything do I need to do about that? BTW I am really glad I found you site before wasting money on another CU301.

Yeah I think the newest version of the CU301 or CU300, which is “generation 6” or something like that, will now let it cycle 1,000 times without communication from the motor to the controller before it shows a fault. Or you can get that CSV160 and a 50/70 pressure switch and solve the problem.

Ok so motor does not care just the dead control thanks for your time.

Ok so motor does not care just the dead control thanks for your time.