az1324
New Member
- Messages
- 21
- Reaction score
- 0
- Points
- 0
Tell me if this is feasible: using a double wye on a 1.5" drain pipe coming out of the wall and splitting to separate p-traps for a double sink with disposal and a p-trap to a standpipe with a water softener style airgap for a dishwasher. Would it be to code in California?
The situation is i am installing a new deep sink and the drain pipe comes out of the wall relatively high so i could skip the baffle tee with the single trap sink setup. also i don't want to use an above counter airgap for the dishwasher.
Thanks.
The situation is i am installing a new deep sink and the drain pipe comes out of the wall relatively high so i could skip the baffle tee with the single trap sink setup. also i don't want to use an above counter airgap for the dishwasher.
Thanks.