Hello,
I just bought/installed a Toto 1.28g 1-piece Eco Soiree yesterday which wasn't too bad except for drilling through tile (Even with a new diamond bit from Lowes). 1.28 instead of my old 1967 5.5 gal toilet is great!
It works well so far except I noticed when it fills the tank the water dribbles down from the top of the fill valve at 4 equidistant locations (like a shower) which doesn't seem right to me. It seems to have some sort of cover on top of the fill valve and a tank level adjustment. It fills to about an inch from the top of the tube and shuts off correctly. But the water level very slowly (hours) will drop low enough to cause the fill valve to hiss and refill. The flapper seems correct, there's no water seemingly leaking anywhere outside the toilet so I assume it's leaking down into the bowl. The hose is attached properly at the top of the tube, aiming down it. Any ideas or suggestions as what to try next? Does it need the brand new fill valve and flapper replaced?
Second question: My wife and I don't really care for the Toto seat on the Soiree. The comfort or the looks. What other elongated seats fit the Soiree's shape well and are comfortable?
Thanks
I just bought/installed a Toto 1.28g 1-piece Eco Soiree yesterday which wasn't too bad except for drilling through tile (Even with a new diamond bit from Lowes). 1.28 instead of my old 1967 5.5 gal toilet is great!
It works well so far except I noticed when it fills the tank the water dribbles down from the top of the fill valve at 4 equidistant locations (like a shower) which doesn't seem right to me. It seems to have some sort of cover on top of the fill valve and a tank level adjustment. It fills to about an inch from the top of the tube and shuts off correctly. But the water level very slowly (hours) will drop low enough to cause the fill valve to hiss and refill. The flapper seems correct, there's no water seemingly leaking anywhere outside the toilet so I assume it's leaking down into the bowl. The hose is attached properly at the top of the tube, aiming down it. Any ideas or suggestions as what to try next? Does it need the brand new fill valve and flapper replaced?
Second question: My wife and I don't really care for the Toto seat on the Soiree. The comfort or the looks. What other elongated seats fit the Soiree's shape well and are comfortable?
Thanks