Yet another Single Sink to Double Sink Vanity

Users who are viewing this thread

asdf

New Member
Messages
1
Reaction score
0
Points
0
Location
Toronto
Hi Everyone,

Just wanted to ask for some advice before I start tinkering with my second floor bathroom...

This is the current setup:
fig 1.jpg

The pipe on the lower left is the (4"?) stack, the pipe in the middle is the (1.5") vent, and the pipe on the right is the (1.5")drain for the existing vanity. Unfortunately, changing anything between the stack and the wall will be exceptionally difficult due to the way it was installed - There is a floor joist directly underneath the wall so the pipes actually come up through the subfloor about 6 inches away from the wall and then enter the wall cavity... :(

Would it be possible to do this?

fig 2.jpg

Would this be better?

fig 3.jpg

Are there any other possibilities?

Thanks in advance!
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks