(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Iron and low Ph problem

  1. #1

    Default Iron and low Ph problem

    I woul like to replace my calcite neutralization system with a solution based injection system.
    I would like to use a water controled dosing pump using a soda ash and hydrogen peroxide solution to cure my soluble iron and low Ph problems.
    Any information as to the as to the type pump to use.

    My well pump has a output in the 10-15 gpm range

    Thanks,
    Peter

  2. #2
    That's all folks! Gary Slusser's Avatar
    Join Date
    Aug 2004
    Location
    Wherever I park the motorhome.
    Posts
    6,792

    Default

    I wouldn't do that, solution feeders can be difficult to live with and especially when you use one attempting to treat two different problems.
    Gary Slusser Retired (= out of business)
    Click Here to learn how to correctly size or program a water softener.
    CAUTION, as of Nov 12 2013 all YouTube videos showing how to rebuild a Clack valve have an error in them that can cause damage.

  3. #3
    Water systems designer, R&D ditttohead's Avatar
    Join Date
    Jan 2012
    Location
    California
    Posts
    1,707
    Blog Entries
    1

    Default

    I agree with Gary on this one but... check out this pump, not sure if it will work for what you are trying to do but the specs are all there. http://www.hydrosystemsco.com/brands...izer-hn55.html

  4. #4
    DIY Member bcpumpguy's Avatar
    Join Date
    Jul 2012
    Location
    Langley BC
    Posts
    70

    Default

    how about using an lmi, stenner, or seko injection pump with water meter you could use the water meter to hook up to one pump and have the other inject of the first pump. I would use soda ash and chlorine then you'll need a contact tank and a birm or nextsand filter.

Similar Threads

  1. Iron problem, well chemistry changing?
    By Scott_J in forum Water Softener Forum, problems, installation and reviews
    Replies: 26
    Last Post: 12-14-2011, 10:04 AM
  2. Need advice on Iron problem
    By Cudos in forum Pumps and Tanks Well Forum & Blog
    Replies: 8
    Last Post: 07-17-2010, 10:03 AM
  3. Iron Problem
    By nalby in forum Pumps and Tanks Well Forum & Blog
    Replies: 3
    Last Post: 09-01-2009, 05:57 PM
  4. Bad Iron problem, what to do
    By Cue777 in forum Pumps and Tanks Well Forum & Blog
    Replies: 77
    Last Post: 07-28-2008, 09:23 AM
  5. cast iron flange problem
    By hopp75 in forum Toilet Forum discussions
    Replies: 3
    Last Post: 04-03-2005, 06:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •