(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 6 of 6

Thread: How to connect (wordy)

Threaded View

  1. #1
    CAD Guy / PCB Designer billonion's Avatar
    Join Date
    Dec 2005
    Location
    Burnsville, MN
    Posts
    10

    Default How to connect (wordy)

    Help. I'm adding a 3/4 bathroom in my basement ( I have a 1994 2 story house with full unfinished basement). The toilet rough in is there, the drain for the sink is there, and the supply lines are overhead. There is only an opening in the concrete floor for the shower drain (think built-in kitty litter box). I dug down about a foot and found a 2 inch PVC pipe running through - see pic. I did a little testing and found this pipe to be the shower, sink and bathtub drain from the master bath on the second floor (water runs from right to left in pic). This is probably a simple question, but how do I attach and trap to this pipe? Do I come off the side and add a P trap or come off the top and install some sort of "S" trap? Of course, this assumes this pipe should be used for the shower drain......

    Great site - Thanks in advance.

    Billonion
    Attached Images Attached Images  
    Last edited by billonion; 12-28-2005 at 05:24 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •