Iron and low Ph problem

Users who are viewing this thread

Kendallroad

New Member
Messages
14
Reaction score
0
Points
0
I woul like to replace my calcite neutralization system with a solution based injection system.
I would like to use a water controled dosing pump using a soda ash and hydrogen peroxide solution to cure my soluble iron and low Ph problems.
Any information as to the as to the type pump to use.

My well pump has a output in the 10-15 gpm range

Thanks,
Peter
 

bcpumpguy

New Member
Messages
70
Reaction score
0
Points
0
Location
Langley BC
how about using an lmi, stenner, or seko injection pump with water meter you could use the water meter to hook up to one pump and have the other inject of the first pump. I would use soda ash and chlorine then you'll need a contact tank and a birm or nextsand filter.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks