Flexcon Challenger tank moved slightly

Users who are viewing this thread

Flawell

New Member
Messages
2
Reaction score
0
Points
1
Location
Northeast Florida
I just had a new Flexcon tank installed on my well. Today, the carpenter building a little house around the tank and softener, moved the tank about a quarter of an inch to the right. He did it before I could say anything. Am I going to have a leak or any other problem with it? Should it be moved back? He was trying to keep it from touching one of the wall studs.

Probably nothing but I just want to be sure there's no issue.

Thanks.
 

Wondering

Member
Messages
144
Reaction score
6
Points
18
Location
Alabama
I wouldn't think that would hurt anything. If you were going to have a leak from moving it, I would think it would have started right then.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks