Chris Fox
Member
I need to patch a 2'x5' saw cut hole in my driveway which had to be done to repair a water main burst.
My plan is to first add gravel then top with sand and water to get my depth back to about 4-5".
Then drill holes in sides of concrete about 1/4 way up from bottom for #4 rebar stakes and epoxy them in.
Then lay in re bar in lattis configuration and tie to keep all suspended and together. Then pour concrete and float.
Am I on the right track to prevent cracking due to driving over?
Thanks in advance!
My plan is to first add gravel then top with sand and water to get my depth back to about 4-5".
Then drill holes in sides of concrete about 1/4 way up from bottom for #4 rebar stakes and epoxy them in.
Then lay in re bar in lattis configuration and tie to keep all suspended and together. Then pour concrete and float.
Am I on the right track to prevent cracking due to driving over?
Thanks in advance!