Wiring a jet pump in conjuction with a storage tank

Users who are viewing this thread

Terrasmooth

New Member
Messages
1
Reaction score
0
Points
0
Location
Northern Arizona
Hello,
I have a 3/4 hp jet pump that I want to use to pump water from my storage tank to my pressure tank.
I have the high and low floats for the storage tank, I need a wiring diagram to wire this setup. Do I need a control box for the jet pump?

www.terrasmooth.com
 

hj

Master Plumber
Messages
33,602
Reaction score
1,041
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
The switch for the lower float has to open when the float drops and the upper one has to open with the float rises to fill the tank. You can wire them in series to control the pump's operation, Once it is full you only need to wire the lower one to stop the pump when the storage tank runs out of water, but you also need a controller to tell the pump when the main tank needs water.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks