(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: replace my 65 yr old oil burner

  1. #1
    DIY Junior Member jim442's Avatar
    Join Date
    Oct 2012
    Location
    annandale va 22003
    Posts
    1

    Default replace my 65 yr old oil burner

    still works fine-maybe inefficient got an estimate for a Solaia SL 4100,with a bunch of pipes,fittings,tank etc
    separately priced the furnace-about $1800 but with install,went very high
    need some suggestions/recommendations in N Va
    thanks Jim

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,401

    Default

    Furnace or boiler? Makes a difference.

    Most old systems are WAY oversized, especially if over the last 65 years, you've done anything to tighten up and insulate the house. Replacing with the same size is a BIG mistake, so you need to evaluate things first.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    In the trades Dana's Avatar
    Join Date
    Jan 2009
    Location
    01609
    Posts
    2,720

    Default

    The Solaia SL 4100 is a cast iron hydronic boiler.

    The SL 4100 is kinda big with 122K of DOE output (more than 3x the heat load on my central MA house). If your house has insulation in the walls and glass in the windows you probably don't need that much, and it may be hard to make something 4-5x oversized run efficiently without system modifications.

    To get a handle on sizing, how much oil did you use last year? (Or if you have a mid to late winter oil bill with a K-factor stamped on it, what's the K-factor?)

Similar Threads

  1. WH burner... doesn't look right.
    By inexplorata in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 04-06-2012, 07:46 AM
  2. shutting down my oil burner
    By deb and jim in forum Boiler Forum
    Replies: 1
    Last Post: 09-12-2011, 12:46 PM
  3. Is it possible to have both an oil and gas burner?
    By richb2 in forum Boiler Forum
    Replies: 2
    Last Post: 01-11-2010, 05:18 PM
  4. Oil Burner Smoking
    By brianosaur in forum HVAC Heating & Cooling
    Replies: 0
    Last Post: 04-20-2009, 06:32 PM
  5. Trianco oil burner
    By kaffirpaul in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 0
    Last Post: 12-27-2004, 07:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •