6" deep well pump help

Users who are viewing this thread

Nelson82046

New Member
Messages
1
Reaction score
0
Points
0
Location
Mocksville N.C.
Bob, I set the cut off @ 30psi due to the max the pump would put out. Is it worth while to rebuild or clean out the pump or just get a new one? Thanks.

Pressure is good for about 15 Mins.then pressure drops to 0. I can shut off breaker for a couple of mins.then cut breaker back on and water pressure will build back up. I have plenty of water.
 

Valveman

Cary Austin
Staff member
Messages
14,599
Reaction score
1,296
Points
113
Location
Lubbock, Texas
Website
cyclestopvalves.com
I started a new thread for you. If you are sure you have plenty of water, the overload in your motor is probalby tripping out. It just takes a few minutes for it to reset itself. If this is the case, it will come back on in a few minutes without cycling the breaker on and off.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks